Product Hrilhfiahna
Magpow Polyurethane PU Foam 750ml hi joint filling atan te, thermal insulation pek nan te, leh sakna atana building materials te secure nan te a tha hle.
THIL AWM DAN PU FOAM
750ml Expanding Polyurethane Foam hi thil pakhat-component, pre-mixed solution a ni. Container-ah hian professional foam dispensing gun emaw, single-use applicator tip emaw-a dah theih tura duan plastic fitting a awm a ni. Foam hian boruak lumna nena inzawmna a neih chuan a insiamrem a, a zau a, a khauh bawk. Construction hna hrang hrang atan a versatile a, voids filling, sealing joint, leh fixture securing-ah te a thawk tha hle bawk. He product hian adhesion chak tak a pe a, chubakah thermal leh sound insulation tha zawk a pe bawk.
White Color PU Foam THIL THAWN THIL THIL AWM DAN
1.Thil chi hrang hrang, UPVC, brickwork, glass, steel, aluminium, thing, leh a ang chi (polypropylene, polyethylene, emaw Teflon atan a tha lo) te chungah bonding strength sang tak a nei.
2.Void-filling performance sang zawk.
3.+5℃leh +35℃inkar temperature-a hman atan a tha.
4.Hnathawh tur temperature range tha ber: +18℃atanga +25℃thleng .
5.Eco-conscious formulation: No-CFC propellants a hmang a, ozone layer a tichhe lo.
Technical lam thil a ni
|
Chhuat |
Polyurethane hmanga siam a ni |
|
Zenghet |
Stable Foam a ni |
|
Curing System a ni |
Moisture-tihdamna |
|
Tack-Hun zalen (min) |
8~15 |
|
Drying Hun a ni |
Dust-free hnuah 20-25 min. |
|
Cutting Hun (darkar) 1.1. |
4~6 (+25℃) a ni. |
|
6~12 (-25℃) a ni. |
|
|
A rah chhuah (L) 1.1. |
30~35 |
|
Tawmte |
Pakhatmah |
|
Post tihzauh a ni |
Pakhatmah |
|
Cellular Structure a awm dan |
60~65% chu cell hawn a ni |
|
Gravity bik (kg/m3) a ni. |
17~22 |
|
Temperature laka inven theihna |
-40℃~+80℃a ni |
|
A hmanna Temperature Range a ni |
+5℃~+35℃a ni |
|
Rawng |
Champagne a ni |
|
Kangmei chhuahna Class (DIN 4102 ) a ni. |
B3 |
|
Insulation Factor (Mw/mk) hmanga siam chhuah a ni. |
<36 |
|
Compressive chakna (kPa) 1.1. |
>100 |
|
Tensile chakna (kPa) 1.1. |
>28 (10%) |
|
Adhesive chakna(kPa) 1.1. |
>75 |
|
Tui lakluh dan (ML) . |
0.5~2(epidermis a awm lo) . |
|
<0.5(with epidermis) |
APPLICATION THIL AWM DAN THIL AWM DAN
Kawngkhar leh Window Assembly: 1.1.Kawngkhar leh kawngkhar siamna tur frame stabilizing, insulating leh anchoring te.
Gap leh Joint Filling: 1.1.Construction surface-a crack, seam, opening, leh void te seal leh filling.
Insulation Attachment hmanga siam a ni:Roofing system-a insulation layer leh fastening components te inzawmkhawm.
A tlangpuiin Fastening & Installation: 1.1.Adhesive-based bonding leh hardware-based mounting hmanna atan.
Utility humhalhna: 1.1.Electrical fittings leh plumbing line vel insulation pek.
Thermal & Sound Control hmanga thil tih dan tur:Heat retention, cold blocking, leh ri tihziaawmna pe chhuak.
Hriselna atana hman tur Packaging:Shake-proof, pressure-resistant transport atan thil hlu tak tak fragile tak tak wrapping.
HMAN DAN THIL AWM DAN THIL AWM DAN
Spray can chu chak takin second 40 tal vawt rawh. I hnawih hmain tui spray hmangin a chung lam chu tlem te tein tifai la, hnim rawh. Dispensing gun emaw tube emaw chu adapter-ah dah rawh. Can chu adapter-ah nghet takin screw la, flow-control screw chu siamrem rawh. Hole emaw gap emaw i fill hian a chanve vel chauh fill la, foam chu a zau dawn avangin. A hnuai lam atanga chunglam thlengin hnawih thin ang che. Foam chu minute 10 vel chhungin surface-dry a ni ang. Minute 20 vel hnuah chuan a tam lutuk chu tihtawp theih a ni. Unset foam hi GNS Foam Cleaner emaw acetone emaw hmangin tihfai theih a ni. A dam kim tawh chuan foam hi mechanical hmang chauhvin a chhuak thei a ni.
1.Can buatsaih dan: Pressurized can chu a hnawih hmain second 40 tal vawt hmasa phawt ang che.
2.Surface Preparation: A hmun chu silfai vek la, tui spray hmangin tlem tal hnim rawh. Surface chu a hnim tur a ni a, saturated a ni tur a ni lo.
3.Dispenser Installation: Foam gun emaw single-use tube emaw chu can-a adapter-ah nghet takin dah rawh.
4.Can Mounting: Can chu adapter-ah nghet takin khih rawh. A awm chuan gun-a flow adjustment screw hmangin output regulate rawh.
5.Foam hman dan:
-BOTTOM UP atang hian hawnna, crack leh void te chu fill up rawh.
-A chanve vel chauh fill la, foam chu a set ang zelin a zau theihna tur hmun awm rawh.
6.Setting kalphung: 1.1.
-Foam chu minute 10 vel chhungin khawih pawhin a vawt ang.
-Trimming hi minute 20 vel hnuah tih theih a ni.
7.Tifai dan: 1.1.
-Wet/uncured foam: GNS Foam Cleaner emaw acetone emaw hmangin silfai nghal tur a ni.
-Fully cured foam: Taksa lama lakchhuah (cutting emaw sanding emaw) a ngai.
STOREAGE LEH SHELF LIFE AWM DAN
Hmun lum leh boruak tha takah dah tur a ni.
Can chu valve chu chunglam hawiin dah reng tur a ni.
PACKAGING THIL AWM DAN
750ml/can, 500ml/can,12pcs/can, Straw chi leh Gun chi hrang hrang.
